vurblocks.blogg.se - Canon pixma print test page without computer

Right-click your printer and select Properties. You can test your printer configuration by printing a test page.

If you have more than one printer installed (such as several network printers) make sure you have selected the right printer as your default printer (right-click on the printer you want to use and select Set as Default Printer). If it says Offline, right-click on it and select Use Printer Online. Go to Start, Printers and Faxes.įind the printer you want to use and make sure it says Ready underneath it. If you still can’t print, check to make sure the printer is not set to offline mode. Next, check to make sure the printer cable is properly connected to both the computer and the printer.

You may also want to check that it has ink if you are using an inkjet printer. First, make sure the printer is on and has paper in the tray. Click here to view possible solutions.As with most computer problems, you should begin with the easiest solutions before moving on to more advanced troubleshooting steps. (Sample: Black ink is not ejected.)Ĭlick here to return to the top.

Some colors of ink are not ejected completely.

Black ink: There are no missing lines and lines are aligned systematically.

If the nozzle check pattern is still incorrect, service may be required. The wait time may allow dried ink in clogged print head nozzles to liquefy, and resolve the problem.

If the Nozzle Check Pattern output is still abnormal even after Deep Cleaning, turn off the printer and letting it sit for 24 hours or more, then perform Deep Cleaning again.

If any lines or colors are missing from the nozzle check pattern perform a deep print head cleaning.Ĭaution: Avoid performing more than three deep cleanings in a twenty-four hour period.

If any lines or colors are missing from the nozzle check pattern perform another print head cleaning.

If the output is incorrect, perform the following steps: If the output is correct, the print head is normal.

Click here to see examples of an incorrect nozzle pattern. Click here to see examples of a correct nozzle pattern. Examine the nozzle check pattern output.(After the printer initializes, it will take about 10 seconds until printing is completed.) Note: The Power lamp blinks and the nozzle check pattern will be printed. Press and hold the (3) button until the Power light (2) blinks twice, release the button.Note: The Nozzle check pattern can only be printed from the cassette when printing without a computer. Load letter sized plain paper in the cassette.By printing a nozzle check pattern, you can check whether ink ejects normally from the print head nozzles. Print Nozzle Check Pattern / Self Test from unit Instructions to print the nozzle check directly from the printer.